dmesg - MickMake NanoPi-M3 1G
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.39-s5p6818 (root@jensen) (gcc version 4.9.3 (ctng-1.21.0-229g-FA) ) #4 SMP PREEMPT Tue Jan 10 19:34:46 HKT 2017
CPU: ARMv7 Processor [410fd033] revision 3 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: NANOPI3
Ignoring unrecognised tag 0x00000000
Display: HDMI selected
nxp_reserve_mem: reserve CMA: size 159100928
NXP/CMA: Reserved 0x65e45000/0x097bb000 for 'ion'
NXP/CMA: success register cma region for 'ion'
Memory policy: ECC disabled, Data cache writealloc
CPU : iomap[ 0]: p 0xc0000000 -> v 0xf0000000 len=0x300000
CPU : iomap[ 1]: p 0xe0000000 -> v 0xf0300000 len=0x100000
CPU : iomap[ 2]: p 0xfff00000 -> v 0xf0400000 len=0x100000
CPU : iomap[ 3]: p 0x2c000000 -> v 0xf0500000 len=0x100000
CPU : iomap[ 4]: p 0x00000000 -> v 0xf0600000 len=0x100000
CPU : DMA Zone Size =16M, CORE 8
s5p6818-NanoPi3: Board initialized
CPU : Clock Generator= 58 EA, DVFS = support, PLL.1
PLL : [0] = 800000000, [1] = 800000000, [2] = 614394000, [3] = 800000000
(0) PLL1: CPU FCLK = 800000000, HCLK = 200000000 (G0)
(7) PLL1: CPU FCLK = 800000000, HCLK = 200000000 (G1)
(2) PLL3: MEM FCLK = 800000000, DCLK = 800000000, BCLK = 400000000, PCLK = 200000000
(1) PLL0: BUS BCLK = 400000000, PCLK = 200000000
(8) PLL0: CCI4 BCLK = 400000000, PCLK = 200000000
(3) PLL0: G3D BCLK = 400000000
(4) PLL0: CODA BCLK = 400000000, PCLK = 200000000
(5) PLL0: DISP BCLK = 400000000, PCLK = 200000000
(6) PLL0: HDMI PCLK = 100000000
On node 0 totalpages: 262144
free_area_init_node: node 0, pgdat c0890980, node_mem_map c0985000
DMA zone: 1516 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 192532 pages, LIFO batch:31
HighMem zone: 532 pages used for memmap
HighMem zone: 67564 pages, LIFO batch:15
PERCPU: Embedded 9 pages/cpu @c1192000 s12608 r8192 d16064 u36864
pcpu-alloc: s12608 r8192 d16064 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init systemd.show_status=false g_ether.host_addr=82:cf:ce:fa:68:18 initrd=0x49000000,0x400000 console=tty1 lcd=HDMI720P60
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 1024MB = 1024MB total
Memory: 867972k/867972k available, 180604k reserved, 272384K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xef800000 - 0xfee00000 ( 246 MB)
lowmem : 0xc0000000 - 0xef600000 ( 758 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc07e5ea8 (8056 kB)
.init : 0xc07e6000 - 0xc081d140 ( 221 kB)
.data : 0xc081e000 - 0xc08a00d0 ( 521 kB)
.bss : 0xc08a00f4 - 0xc0984448 ( 913 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:272
GIC @f0009000: start 0 (gic 31)
GPIO @f001a000: start 106, mask 0xffffffff (gpio 85)
GPIO @f001b000: start 138, mask 0xffffffff (gpio 86)
GPIO @f001c000: start 170, mask 0xffffffff (gpio 87)
GPIO @f001d000: start 202, mask 0xffffffff (gpio 88)
GPIO @f001e000: start 234, mask 0xffffffff (gpio 89)
ALIVE @f0010800: start 266, mask 0x000000ff (alive 36, num 6)
timer.0: source, 10000000(HZ:250), mult:3355443200
timer.1: event , 10000000(HZ:250), mult:42949673
sched_clock: 32 bits at 250 Hz, resolution 4000000ns, wraps every 4294967292ms
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop... 1594.36 BogoMIPS (lpj=3188736)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: no hardware support available
Setting up static identity map for 0x405db8a8 - 0x405db900
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
CPU4: thread -1, cpu 0, socket 4, mpidr 80040400
CPU5: thread -1, cpu 1, socket 4, mpidr 80040401
CPU6: thread -1, cpu 2, socket 4, mpidr 80040402
CPU7: thread -1, cpu 3, socket 4, mpidr 80040403
Brought up 8 CPUs
SMP: Total of 8 processors activated (12754.94 BogoMIPS).
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 3
pwm: max = 50000000 hz
prepare_gpio_suspend:
alfn[0][0]: 0x00000000, alfn[0][1]: 0x00000000
alfn[1][0]: 0x66800000, alfn[1][1]: 0x55555566
alfn[2][0]: 0x55555555, alfn[2][1]: 0x00555555
alfn[3][0]: 0x00000000, alfn[3][1]: 0x00000000
alfn[4][0]: 0x00000000, alfn[4][1]: 0x55540000
dummy:
NET: Registered protocol family 16
[Register machine platform devices]
mach: add amba device pl08xdmac.0
mach: add amba device pl08xdmac.1
mach: add device uart0
mach: add device uart1
mach: add device uart3
mach: add device uart4
mach: add device syncgen [2]
mach: add device hdmi
mach: add device i2c bus (array:3)
mach: add device Real Time Clock
mach: add device generic pwm (array:4)
mach: add device generic gpio (array:6)
mach: add device i2s (array:1)
mach: add device spdif tx
mach: add device usb_ehci
mach: add device usb_ohci
mach: add device usb otg
mach: add device ion-nxp
mach: add graphic device opengl|es
mach: add device spi0
[Register board platform devices]
plat: board revision 7
plat: add dynamic frequency (pll.1)
plat: add device TMU
plat: add framebuffer
plat: boot from mmc.0
plat: add device sdmmc [0]
plat: add device sdmmc [1]
plat: add backlight pwm device
plat: add device keypad
plat: add device spdif playback
plat: add device asoc-es8316
plat: add device nxp-v4l2
plat: register spidev
plat: add touch(ft5x0x) device
plat: add touch(goodix) device
plat: goodix: irq=186 (80)
plat: add touch(himax) device
plat: add touch(it7260) device
plat: add onewire ts device
plat: add adxl34x device
plat: add bmp085 device
plat: add ds1307 device
plat: add pcf8591 device
plat: add device nxp-gmac
plat: add device gpio_led
plat: add device pwm_led
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
bio: create slab at 0
gpiochip_add: registered GPIOs 0 to 31 on device: GPIOA
gpiochip_add: registered GPIOs 32 to 63 on device: GPIOB
gpiochip_add: registered GPIOs 64 to 95 on device: GPIOC
gpiochip_add: registered GPIOs 96 to 127 on device: GPIOD
gpiochip_add: registered GPIOs 128 to 159 on device: GPIOE
gpiochip_add: registered GPIOs 160 to 165 on device: GPIOALV
pl08xdmac pl08xdmac.0: Unbalanced pm_runtime_enable!
pl08xdmac pl08xdmac.0: initialized 8 virtual memcpy channels
pl08xdmac pl08xdmac.0: initialized 16 virtual slave channels
pl08xdmac pl08xdmac.0: DMA: PL080 rev1 at 0xc0000000 irq 33
pl08xdmac pl08xdmac.1: Unbalanced pm_runtime_enable!
pl08xdmac pl08xdmac.1: initialized 8 virtual memcpy channels
pl08xdmac pl08xdmac.1: initialized 15 virtual slave channels
pl08xdmac pl08xdmac.1: DMA: PL080 rev1 at 0xc0001000 irq 34
nxp_ion_probe success!!!
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.3: using pins 159 (SDA) and 158 (SCL)
s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
s3c-i2c s3c2440-i2c.0: slave address 0x10
s3c-i2c s3c2440-i2c.0: bus frequency set to 390 KHz
s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
s3c-i2c s3c2440-i2c.1: slave address 0x10
s3c-i2c s3c2440-i2c.1: bus frequency set to 97 KHz
s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
s3c-i2c s3c2440-i2c.2: slave address 0x10
s3c-i2c s3c2440-i2c.2: bus frequency set to 195 KHz
Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
axp_mfd 3-0034: AXP (CHIP ID: 0x06) detected
axp22_ldo1: 3000 mV
axp22_aldo1: 700 3300 mV at 3300 mV
axp22_aldo2: 700 3300 mV at 1800 mV
axp22_aldo3: 700 3300 mV at 1000 mV
axp22_dldo1: 700 3300 mV at 3300 mV
axp22_dldo2: No configuration
axp22_dldo2: 700 3300 mV at 700 mV
axp22_dldo3: No configuration
axp22_dldo3: 700 3300 mV at 700 mV
axp22_dldo4: No configuration
axp22_dldo4: 700 3300 mV at 700 mV
axp22_eldo1: 700 3300 mV at 1800 mV
axp22_eldo2: 700 3300 mV at 3300 mV
axp22_eldo3: No configuration
axp22_eldo3: 700 3300 mV at 700 mV
axp22_dc5ldo: No configuration
axp22_dc5ldo: 700 1400 mV at 1200 mV
axp22_dcdc1: 1600 3400 mV at 3300 mV
axp22_dcdc2: 600 1540 mV at 1200 mV
axp22_dcdc3: 600 1860 mV at 1200 mV
axp22_dcdc4: 600 1540 mV at 1500 mV
axp22_dcdc5: 1000 2550 mV at 1500 mV
axp22_ldoio0: 700 3300 mV at 3800 mV
axp22_ldoio1: 700 3300 mV at 3800 mV
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource source timer
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
dummy_timer is not functional.
Could not switch to high resolution mode on CPU 2
Could not switch to high resolution mode on CPU 0
Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
Could not switch to high resolution mode on CPU 1
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: dummy_timer is not functional.
dummy_timer is not functional.
Could not switch to high resolution mode on CPU 5
Could not switch to high resolution mode on CPU 4
dummy_timer is not functional.
dummy_timer is not functional.
Could not switch to high resolution mode on CPU 7
Could not switch to high resolution mode on CPU 6
dummy_timer is not functional.
Could not switch to high resolution mode on CPU 3
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initramfs unpacking failed: junk in compressed archive
Freeing initrd memory: 4096K
Disply Reset Status : On
nxp_edid_init
_edid_i2c_probe
nxp_edid_init: success!!!
nxp_hdmiphy_init
nxp_edid_update
_edid_read_block: block 0, segment 0, offset 0
_edid_read_block: sum 0x0
_edid_read_block: block 1, segment 0, offset 128
_edid_read_block: sum 0x0
EDID: 00000000: 00 ff ff ff ff ff ff 00 14 e1 01 00 00 00 00 00 ................
EDID: 00000010: 11 17 01 03 80 00 02 78 1a cf 74 a3 57 4c b0 23 .......x..t.WL.#
EDID: 00000020: 09 48 4c 00 00 00 81 c0 d1 c0 01 01 01 01 01 01 .HL.............
EDID: 00000030: 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c .......:..q8-@X,
EDID: 00000040: 45 00 c4 8e 21 00 00 1e 00 00 00 18 00 1c 16 20 E...!..........
EDID: 00000050: 58 2c 25 00 c4 8e 21 00 00 9e 00 00 00 fc 00 45 X,%...!........E
EDID: 00000060: 6c 67 61 74 6f 0a 20 20 20 20 20 20 00 00 00 fd lgato. ....
EDID: 00000070: 00 17 3d 19 46 0f 00 0a 20 20 20 20 20 20 01 e5 ..=.F... ..
EDID: 00000080: 02 03 26 f4 51 85 04 03 02 12 13 94 16 07 06 11 ..&.Q...........
EDID: 00000090: 15 a1 a2 27 1f 10 23 09 07 01 83 01 00 00 67 03 ...'..#.......g.
EDID: 000000a0: 0c 00 20 00 20 2d 8c 0a a0 14 51 f0 16 00 26 7c .. . -....Q...&|
EDID: 000000b0: 43 00 c4 8e 21 00 00 98 8c 0a d0 8a 20 e0 2d 10 C...!....... .-.
EDID: 000000c0: 10 3e 96 00 c4 8e 21 00 00 19 01 1d 00 72 51 d0 .>....!......rQ.
EDID: 000000d0: 1e 20 6e 28 55 00 c4 8e 21 00 00 1f 01 1d 80 18 . n(U...!.......
EDID: 000000e0: 71 1c 16 20 58 2c 25 00 c4 8e 21 00 00 9e 00 00 q.. X,%...!.....
EDID: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ................
find cec header!_edid_find_target_cec_address: cec physical address 2000
nxp_edid_update: EDID found 1080p@60
nxp_edid_update: EDID found 720p@60
nxp_edid_update: EDID found 1080p@60
nxp_edid_update: EDID found 480p@59.94
nxp_edid_update: EDID found 720p@60
nxp_edid_update: EDID found 720p@60
nxp_edid_update: EDID found 480p@59.94
nxp_edid_update: EDID found 480p@59.94
nxp_edid_update: EDID found 576p@50
nxp_edid_update: EDID found 720p@50
nxp_edid_update: EDID found 576p@50
nxp_edid_update: EDID found 1080p@25
nxp_edid_update: EDID found 1080p@30
nxp_edid_update: EDID found 1080p@50
nxp_edid_update: EDID found 1080p@60
nxp_edid_update: EDID misc flags 0x6)
nxp_edid_update: EDID Audio channels 2
hdmi_get_edid_preset: preferred_preset is supported
nxp_hdmiphy_s_dv_preset: preset(8)
Display HDMI register operation
Display.0 fps=161 (6 ms), wait= 4 jiffies, Pixelclk=200000000hz
bt_bcm: rfkill initialized
audit: initializing netlink socket (disabled)
type=2000 audit(0.704:1): initialized
highmem bounce pool size: 64 pages
NFS: Registering the id_resolver key type
fuse init (API version 7.18)
msgmni has been set to 1171
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
display.0 connected to fb.0 ...
nxp-fb.0: dma addr = 0x65e45000, buf[0xe530ff40]
nxp-fb.0: dma addr = 0x661c9000, buf[0xe5310100]
hdmi_stop entered
hdmi_run entered
nxp_hdmiphy_s_stream: 1
_hdmiphy_reg_set
HDMI PHY Ready!!!
Display.0 fps=161 (6 ms), wait= 4 jiffies, Pixelclk=200000000hz
_calc_hdmi_sync_param: _h_sync_offset 0
hdmi_run exit
nxp-fb 0: out[0], 1280 * 720 - 32 bpp (phys:65e45000 virt:0xef831000 max:7372800)
Console: switching to colour frame buffer device 160x45
nxp-uart.0: ttySAC0 at MMIO 0xc00a1000 (irq = 39) is a S3C6400/10
HDMI HPD State 0x1
nxp_edid_update
_edid_read_block: block 0, segment 0, offset 0
_edid_read_block: sum 0x0
_edid_read_block: block 1, segment 0, offset 128
_edid_read_block: sum 0x0
EDID: 00000000: 00 ff ff ff ff ff ff 00 14 e1 01 00 00 00 00 00 ................
EDID: 00000010: 11 17 01 03 80 00 02 78 1a cf 74 a3 57 4c b0 23 .......x..t.WL.#
EDID: 00000020: 09 48 4c 00 00 00 81 c0 d1 c0 01 01 01 01 01 01 .HL.............
EDID: 00000030: 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c .......:..q8-@X,
EDID: 00000040: 45 00 c4 8e 21 00 00 1e 00 00 00 18 00 1c 16 20 E...!..........
EDID: 00000050: 58 2c 25 00 c4 8e 21 00 00 9e 00 00 00 fc 00 45 X,%...!........E
EDID: 00000060: 6c 67 61 74 6f 0a 20 20 20 20 20 20 00 00 00 fd lgato. ....
EDID: 00000070: 00 17 3d 19 46 0f 00 0a 20 20 20 20 20 20 01 e5 ..=.F... ..
EDID: 00000080: 02 03 26 f4 51 85 04 03 02 12 13 94 16 07 06 11 ..&.Q...........
EDID: 00000090: 15 a1 a2 27 1f 10 23 09 07 01 83 01 00 00 67 03 ...'..#.......g.
EDID: 000000a0: 0c 00 20 00 20 2d 8c 0a a0 14 51 f0 16 00 26 7c .. . -....Q...&|
EDID: 000000b0: 43 00 c4 8e 21 00 00 98 8c 0a d0 8a 20 e0 2d 10 C...!....... .-.
EDID: 000000c0: 10 3e 96 00 c4 8e 21 00 00 19 01 1d 00 72 51 d0 .>....!......rQ.
EDID: 000000d0: 1e 20 6e 28 55 00 c4 8e 21 00 00 1f 01 1d 80 18 . n(U...!.......
EDID: 000000e0: 71 1c 16 20 58 2c 25 00 c4 8e 21 00 00 9e 00 00 q.. X,%...!.....
EDID: 000000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ................
find cec header!_edid_find_target_cec_address: cec physical address 2000
nxp_edid_update: EDID found 1080p@60
nxp_edid_update: EDID found 720p@60
nxp_edid_update: EDID found 1080p@60
nxp_edid_update: EDID found 480p@59.94
nxp_edid_update: EDID found 720p@60
nxp_edid_update: EDID found 720p@60
nxp_edid_update: EDID found 480p@59.94
nxp_edid_update: EDID found 480p@59.94
nxp_edid_update: EDID found 576p@50
nxp_edid_update: EDID found 720p@50
nxp_edid_update: EDID found 576p@50
nxp_edid_update: EDID found 1080p@25
nxp_edid_update: EDID found 1080p@30
nxp_edid_update: EDID found 1080p@50
nxp_edid_update: EDID found 1080p@60
nxp_edid_update: EDID misc flags 0x6)
nxp_edid_update: EDID Audio channels 2
nxp_edid_preferred_preset
_hdmi_hpd_changed: edid update success, preset 18
nxp_edid_supports_hdmi
notify_hpd_changed: state 1
hdmi_run entered
hdmi_run: hdmi already running!
console [ttySAC0] enabled
nxp-uart.1: ttySAC1 at MMIO 0xc00a0000 (irq = 38) is a S3C6400/10
nxp-uart.3: ttySAC3 at MMIO 0xc00a3000 (irq = 41) is a S3C6400/10
nxp-uart.4: ttySAC4 at MMIO 0xc006d000 (irq = 42) is a S3C6400/10
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
-- nxpmac initialize --
stmmac - user ID: 0x37, Synopsys ID: 0x37
Ring mode enabled
DMA HW capability register supported
Enhanced/Alternate descriptors
Enabled extended descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
stmmac: probed
eth0: PHY ID 001cc915 at 0 IRQ 257 (stmmac-0:00)
eth0: PHY ID 001cc915 at 7 IRQ 257 (stmmac-0:07) active
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
nxp-ehci nxp-ehci: SLsi Synopsys EHCI Host Controller
nxp-ehci nxp-ehci: new USB bus registered, assigned bus number 1
nxp-ehci nxp-ehci: irq 82, io mem 0xc0030000
nxp-ehci nxp-ehci: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: SLsi Synopsys EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.39-s5p6818 ehci_hcd
usb usb1: SerialNumber: nxp-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Core Release: 2.93a
Setting default values for core params
Finished setting default values for core params
usb 1-1: new high-speed USB device number 2 using nxp-ehci
Using Descriptor DMA mode
Dedicated Tx FIFOs mode
dwc_otg: Microframe scheduler enabled
dwc_otg dwc_otg: DWC OTG Controller
dwc_otg dwc_otg: new USB bus registered, assigned bus number 2
dwc_otg dwc_otg: irq 81, io mem 0x00000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb usb2: Product: DWC OTG Controller
usb usb2: Manufacturer: Linux 3.4.39-s5p6818 dwc_otg_hcd
usb usb2: SerialNumber: dwc_otg
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
dwc_otg: FIQ disabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split fix disabled
Module dwc_common_port init
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
nxp-ohci nxp-ohci: SLsi Synopsys OHCI Host Controller
nxp-ohci nxp-ohci: new USB bus registered, assigned bus number 3
nxp-ohci nxp-ohci: irq 82, io mem 0xc0020000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: SLsi Synopsys OHCI Host Controller
usb usb3: Manufacturer: Linux 3.4.39-s5p6818 ohci_hcd
usb usb3: SerialNumber: nxp-ohci
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
USB Serial support registered for FTDI USB Serial Device
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
usbcore: registered new interface driver option
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver pl2303
USB Serial support registered for pl2303
g_ether gadget: using random self ethernet address
usb0: MAC 0e:62:76:4f:5f:b9
usb0: HOST MAC 82:cf:ce:fa:68:18
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
mousedev: PS/2 mouse device common for all mice
usb 1-1.1: new high-speed USB device number 3 using nxp-ehci
input: Nexell Keypad as /devices/platform/nxp-keypad/input/input0
usbcore: registered new interface driver xpad
i2c-core: driver [IT7260-ts] using legacy suspend method
i2c-core: driver [IT7260-ts] using legacy resume method
GTP driver installing...
i2c-nxp.2: ack was not received
i2c->nxp.2: incomplete xfer (-6)
himax_ts 2-0048: Unable to get DevId
touchscreen-1wire initialized
backlight-1wire initialized
input: fa_ts_input as /devices/virtual/input/input1
ts-if initialized
[RTC] day=2016.01.01 time=08:00:00
nxp-rtc nxp-rtc.0: rtc core: registered nxp-rtc as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 248
IR NEC protocol handler initialized
usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0608
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: USB2.0 Hub
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR LIRC bridge handler initialized
gspca_main: v2.14.0 registered
nxp_v4l2_probe entered
...................................ov5640_probe 2234
usb 1-1.2: new low-speed USB device number 4 using nxp-ehci
...................................ov5640_video_probe 2193
i2c-nxp.0: ack was not received
i2c->nxp.0: incomplete xfer (-6)
ov5640 0-003c: reg_read: i2c read error, reg: 300a
OV5640 read error!!!!!!!!!!!!!!!
ov5640_initialize_ctrls.............1794...........
create_nxp_out
register_nxp_out
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Driver for 1-wire Dallas network protocol.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
DVFS: ASV[2] IDS 8mA, Ro 99 -> Table [IDS 15mA, Ro 130]
ASV 0 = 1400000 khz, 1240 mV
ASV 1 = 1300000 khz, 1180 mV
ASV 2 = 1200000 khz, 1140 mV
ASV 3 = 1100000 khz, 1100 mV
ASV 4 = 1000000 khz, 1060 mV
ASV 5 = 900000 khz, 1040 mV
ASV 6 = 800000 khz, 1000 mV
ASV 7 = 700000 khz, 940 mV
ASV 8 = 600000 khz, 940 mV
ASV 9 = 500000 khz, 940 mV
ASV 10 = 400000 khz, 940 mV
DVFS: regulator vdd_arm_1.3V
DVFS: cpu DVFS with PLL.1 [tables=11]
cpuidle: using governor ladder
cpuidle: using governor menu
Synopsys Designware Multimedia Card Interface Driver
usb 1-1.2: New USB device found, idVendor=0b39, idProduct=0001
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB to PS2 Adaptor V3.10
usb 1-1.2: Manufacturer: Composite USB PS2 Converter
dw_mmc dw_mmc.0: Using internal DMA controller.
mmc0: no vmmc regulator found
dw_mmc dw_mmc.0: Using external card detect irq 267 (io 161)
dw_mmc dw_mmc.0: Version ID is 250a
dw_mmc dw_mmc.0: DW MMC controller at irq 75, 32 bit host data width, 32 deep fifo hw timeout 500 ms
dw_mmc dw_mmc.1: Using internal DMA controller.
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
mmc1: no vmmc regulator found
dw_mmc dw_mmc.1: Version ID is 250a
dw_mmc dw_mmc.1: DW MMC controller at irq 76, 32 bit host data width, 32 deep fifo hw timeout 500 ms
Registered led device: led1
Registered led device: led2
input: Composite USB PS2 Converter USB to PS2 Adaptor V3.10 as /devices/platform/nxp-ehci/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
usb 1-1.1.3: new high-speed USB device number 5 using nxp-ehci
generic-usb 0003:0B39:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Composite USB PS2 Converter USB to PS2 Adaptor V3.10] on usb-nxp-ehci-1.2/input0
input: Composite USB PS2 Converter USB to PS2 Adaptor V3.10 as /devices/platform/nxp-ehci/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
generic-usb 0003:0B39:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Composite USB PS2 Converter USB to PS2 Adaptor V3.10] on usb-nxp-ehci-1.2/input1
mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SL32G 29.7 GiB
mmcblk0: p1 p2
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd pcm: register sound platform 'nxp-pcm'
usb 1-1.1.3: New USB device found, idVendor=05e3, idProduct=0716
usb 1-1.1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 1-1.1.3: Product: USB Storage
usb 1-1.1.3: SerialNumber: 000000009722
scsi0 : usb-storage 1-1.1.3:1.0
snd i2s: ch 0, master, iis mode, 48000(47999)hz, 32 FBITs, MCLK=12287880hz, RFS=256
usb 1-1.1.4: new high-speed USB device number 6 using nxp-ehci
asoc: ES8316 HiFi nxp-i2s.0 mapping ok
spdif-tx: 48000(47999)Hz, MCLK=12287880hz HDMI out
asoc: dit-hifi nxp-spdif-tx mapping ok
usb 1-1.1.4: New USB device found, idVendor=152d, idProduct=2329
usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1.1.4: Product: USB to ATA/ATAPI Bridge
usb 1-1.1.4: Manufacturer: JMicron
usb 1-1.1.4: SerialNumber: 9FFFFFFFFFFF
usb-storage 1-1.1.4:1.0: Quirks match for vid 152d pid 2329: 8020
scsi1 : usb-storage 1-1.1.4:1.0
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (13626 buckets, 54504 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 35
Registering the dns_resolver key type
Registering SWP/SWPB emulation handler
axp22_dcdc5: incomplete constraints, leaving on
axp22_dcdc4: incomplete constraints, leaving on
axp22_dcdc3: incomplete constraints, leaving on
axp22_dcdc2: incomplete constraints, leaving on
axp22_dcdc1: incomplete constraints, leaving on
axp22_dc5ldo: incomplete constraints, leaving on
axp22_eldo2: incomplete constraints, leaving on
axp22_eldo1: incomplete constraints, leaving on
axp22_dldo1: incomplete constraints, leaving on
axp22_aldo3: incomplete constraints, leaving on
axp22_aldo2: incomplete constraints, leaving on
axp22_aldo1: incomplete constraints, leaving on
axp22_ldo1: incomplete constraints, leaving on
otg_wakelock_init: No USB transceiver found
nxp-rtc nxp-rtc.0: setting system clock to 2016-01-01 08:00:01 UTC (1451635201)
tmu[0] = trim 48:0, ret 1
TMU: register tmu.0 to hwmon (max 1400000khz)
ALSA device list:
#0: I2S-ES8316
#1: SPDIF-Transciever
Freeing init memory: 220K
Write protecting the kernel text section c0008000 - c07b8000
rodata_test: attempting to write to read-only section:
write to read-only section trapped, success
scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9722 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Attached SCSI removable disk
scsi 1:0:0:0: Direct-Access VB0250EA VER PQ: 0 ANSI: 2 CCS
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 34 00 00 00
sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'arm'.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Expecting device dev-ttySAC0.device...
systemd[1]: Expecting device dev-ttyAMA0.device...
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Expecting device dev-mmcblk0p1.device...
Loading modules backported from Linux version v4.4.2-0-g1cb8570
Backport generated by backports.git v4.4.2-1-0-gbec4037
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Debug File System.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Syslog Socket.
dhd_module_init: in
======== bcm_wlan_set_plat_data ========
host_oob_irq: 187
host_oob_irq_flags = 414
dhd_wifi_platform_load: Enter
Power-up adapter 'DHD generic adapter'
wifi_platform_set_power = 1
======== PULL WL_REG_ON HIGH! ========
wifi_pm: bcmdhd: 1
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[231]: starting version 215
wifi_platform_bus_enumerate device present 1
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
mmc1: new high speed SDIO card at address 0001
bcmsdh_register: register client driver
bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
bus num (host idx)=1, slot num (rca)=1
found adapter info 'DHD generic adapter'
dhdsdio_probe : no mutex held. set lock
F1 signature read @0x18000000=0x1540a9a6
F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
DHD: dongle ram size is set to 524288(orig 524288) at 0x0
dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
dhd_conf_set_conf_path_by_nv_path: config_path=/lib/firmware/ap6212/config.txt
dhd_conf_read_config: PM = 0
wl_create_event_handler(): thread:wl_event_handler:126 started
tsk Enter, tsk = 0xe4261d78
dhd_attach(): thread:dhd_watchdog_thread:127 started
dhd_attach(): thread:dhd_dpc:129 started
dhd_dpc_thread: set dpc_cpucore 0 from config.txt
dhd_attach(): thread:dhd_rxf:12d started
dhd_deferred_work_init: work queue initialized
dhdsdio_probe_init: set use_rxchain 0 from config.txt
Dongle Host Driver, version 1.201.59.5 (r506368)
Register interface [wlan0] MAC: 94:a1:a2:a3:06:70
dhd_prot_ioctl : bus is down. we have nothing to do
bcmsdh_oob_intr_unregister: Enter
bcmsdh_oob_intr_unregister: irq is not registered
dhd_txglom_enable: enable 0
dhd_bus_devreset: WLAN OFF DONE
wifi_platform_set_power = 0
======== PULL WL_REG_ON LOW! ========
wifi_pm: bcmdhd: 0
bt_bcm: rfkill set_block On GPIOB.8
dhdsdio_probe : the lock is released.
dhd_module_init: Exit err=0
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
setting PHY_BASEADDR_POWER_GATE, set 1
setting PHY_BASEADDR_PMU_ISOLATE+4, set 0
setting PHY_BASEADDR_PMU_ISOLATE+8, set 0
setting PHY_BASEADDR_PMU_ISOLATE, set 1
read PHY_BASEADDR_PMU_ISOLATE + 0xC
Wait Power UP Ack(powerUpAck=0x00000000)
setting ClockGen, set 1
setting Reset VR addr(0xf0012008)
setting PHY_BASEADDR_VR_PMU addr(0xf0072000)
Vr: VR device driver loaded(ver1.2) for s5p6818
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[223]: Received request to flush runtime journal from PID 1
eth0: device MAC address 0e:92:19:9a:b4:55
PHY: stmmac-0:07 - Link is Up - 1000/Full
eth0: no IPv6 routers present
dhd_open: Enter e4850800
Dongle Host Driver, version 1.201.59.5 (r506368)
wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0
wifi_platform_set_power = 1
======== PULL WL_REG_ON HIGH! ========
wifi_pm: bcmdhd: 1
sdio_reset_comm():
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
dhd_bus_devreset: == WLAN ON ==
F1 signature read @0x18000000=0x1540a9a6
F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
DHD: dongle ram size is set to 524288(orig 524288) at 0x0
dhdsdio_probe_init: set use_rxchain 0 from config.txt
dhd_conf_read_config: PM = 0
dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
Final fw_path=/lib/firmware/ap6212/fw_bcm43438a0.bin
Final nv_path=/lib/firmware/ap6212/nvram.txt
Final conf_path=/lib/firmware/ap6212/config.txt
NVRAM version: AP6212_NVRAM_V1.0_20140603
dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
bcmsdh_oob_intr_register: Enter
bcmsdh_oob_intr_register: HW_OOB enabled
bcmsdh_oob_intr_register OOB irq=187 flags=414
bcmsdh_oob_intr_register: enable_irq_wake
dhd_conf_set_band: Set band 0
dhd_preinit_ioctls: Set tcpack_sup_mode 0
Firmware up: op_mode=0x0005, MAC=94:a1:a2:a3:06:70
dhd_conf_set_country: Set country CN, revision 0
Country code: CN (CN/0)
dhd_conf_set_roam: Set roam_off 1
Firmware version = wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a
Driver: 1.201.59.5 (r506368)
Firmware: wl0: Jun 6 2014 14:50:39 version 7.10.226.49 (r) FWID 01-8962686a
dhd_txglom_enable: enable 0
dhd_conf_set_disable_proptx: set disable_proptx 0
dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
wl_android_wifi_on: Success
dhd_open: Exit ret=0
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
wlan0: no IPv6 routers present
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
bt_bcm: rfkill set_block Off GPIOB.8
bt_bcm: rfkill set_block Off GPIOB.8
bt_bcm: rfkill set_block Off GPIOB.8